Our Tier 400 series Remote Monitoring System All-In-One (RMS AIO) unit is Southern Tier Technologies’ solution for the need to monitor the health of your surge protection equipment when it is installed inside of a cabinet, or obscured from view.

 

This Remote Monitoring System is an All-In-One unit. The unit is entirely contained in a 3.3”x3.3” enclosure with integrated external mounting feet. Installation only requires drilling two holes in the surface of the object you would like the RMS mounted on, and securely attaching it with your desired hardware (nut & bolt, screw, etc.. depending on type of mounting surface).

 

After the unit is securely attached, you only need to connect the Form C relay to those in the units you wish to monitor, it is capable of monitoring multiple units simultaneously. After the relays are connected, you simply plug the power cable into a standard 120V outlet and your RMS installation is complete and the unit is operational. There is a push to test button that ensures the function of all indication, including the audible alarm.

 

 

The RMS will indicate with the alarm sounding, the “Service Required” red LED will turn on, and the “Optimal” green LED will turn off when there is a failure in any phase, of any unit, it is monitoring.

The unit will continue to indicate module failure until either the problem is rectified, the relays are disconnected, or the RMS unit power is disconnected.

 

The RMS has a simple interface, this allows the unit to be small, inexpensive, and extremely versatile. While it can not tell you specifically which unit or phase has failed, it can monitor for failure in multiple surge units, or any device with a Form C relay. All indication on the monitored device will still be active and easily indicate which unit or phase has specifically failed, upon further investigation.

 

When a job requires a remote monitor, this unit provides the necessary indication, a simple to install package, and can be installed on nearly any surface.

If a remote monitor installed flush into a surface is required, see our RMS Panel Mount Unit.

 

 

Features:

- Remote Monitor for any unit with a

Form C Relay

- Capable of monitoring multiple units

at the same time.

- Unit is self contained

- LED indication for if unit is healthy

or if service is required

- Audible Alarm with disable switch

- Push to Test Button for indication

function

- 120V supply cable for unit power

with 5-15P plug for standard 120V

Outlet

- Integrated External Mounting Feet

- Drill Mounting Template Included