Tier 450 NEMA 4X P3 Wire Lead
Stainless Steel Flush Mount Kit

Surge Protection Device

Our Tier 450 Series Flush Mount Kit(FMK) is our NEMA 4X P3 Wire Lead SPD that is modified for flush mounting into a wall or cabinet, with a stainless steel face plate.
The kit has a stainless steel face plate,

modified mounting bracket,

waterproof overlay,

custom standoffs,

rubber washers,

and stainless screws.

The unit is offered with or without a counter window and matching overlay.

 

This kit is ideal for locations that frequently need to be cleaned with hoses, need units to be unobtrusive, and make cleaning around equipment easier.

 

From the designers and manufacturers of AccuVar® and Interceptor®.

 

This unit has a watertight NEMA 4X polycarbonate enclosure with integrated mounting brackets, the stainless face plate is also watertight with rubber washers and a waterproof overlay. There is no gasket for the outer edges of the face plate, a waterproof RTV or Silicone seal is recommended during install to maintain a watertight surface.

Please note, stainless steel is rust resistant, not rust proof. A basic level of preventative maintenance is occasionally required to prevent rust, such as a very light coating in oil.
Rusting on the face plate is not covered by our warranty, but is easily remedied by a light sanding and oiling.

 

This non-Modular SPD has models that range from 50kA to 150kA per mode.

 

You may select the UL 1449 location, Type 2 is the default, and the most common, selection. (If you are unsure of the UL 1449 selection you need, please contact us, we will be happy to help.)

 

All models have 5 feet of wire leads.

 

 All units come with form “C” remote contacts, two color LED indication, and a audible alarm with disable switch. Surge Counter is optional.

 

Features:

 

-Stainless Steel Face Plate and Kit

-Thermally Protected Metal Oxide Varistors

-Surge Current Range: 50,000 amps per mode to 150,000 amps per mode

-Filtering components provide sine wave tracking

-All Modes of protection (L-N, L-G, N-G, & L-L)

-ANSI/UL 1449 4th Edition, CUL

-UL 1283 EMI/RFI Listed

-Short Circuit Rating: 200 kAIC

-NEMA 4X Plastic enclosure

-Visual Diagnostics - Surge Counter, LED

-Audible Alarm w/ Disable Switch

-Warranty: 10 Years

 

 

General Technical Specifications
Connection Type Parallel
Maximum Continuous Operating Voltage 120V, 150 VAC; 125%; 240V, 320 VAC; 277V, 320 VAC; 480V, 550 VAC; All Others 115%
Short Circuit Rating 200kAIC
Protection Modes All Connected Modes: L-N, L-L, L-G, N-G
Operating Frequency Range 47 - 63 Hz
UL 1449 Location Type Type 2 (Type 1 available by special order)
UL 1449 Nominal Discharge Current (In) 20 kA
Connection #10 AWG 5ft Wire Lead
Status Indication Dual Color LEDs, Form C, Surge Counter, Audible Alarm w/ disable switch
Enclosure NEMA 4X rated (Polycarbonate)
Flush Mount Kit - Included Stainless Steel Face Plate - Precut & Drilled w/ Waterproof Overlay
QTY 4 - 3/8" Dia. Custom Standoffs - 4.17"
Screws for standoffs
Rubber Washers
Modified Mounting Bracket on back of SPD
50 Ohm EMI/RFI Attenuation (Only available on Type 2) 45dB
Response Time <0.5 nanoseconds
Operating Temperature -40 C to +75 C
Operating Humidity 0% to 95% non-condensing
Unit Size (Height x Width x Depth)
Weight SPD - 5.3 lbs Face Plate - 3 lbs
Non-Modular P3 4X 9.14" x 5.70" x 4.15"
Standoffs Length 4.17"
Stainless Steel Face Plate 12.00" x 8.50" x 0.062"
Fully Assembled Depth 4.292"
Warranty 10 Years

307 Chaumont Dr. │ Endwell, NY 13760 │ Phone: 607-484-1212 Toll-Free: 866-748-2357

SOUTHERN TIER TECHNOLOGIES ©  2017 - 2022

3

307 Chaumont Dr. │ Endwell, NY 13760
Phone 607-484-1212Toll-Free: 866-748-2357
Fax: 607-953-6403